UtiALL v1.0 Manual

Utiall is a program that let you know the time, battery condition, free memory and external card space without leave other program.

Installing the program

Warning

Activating UtiALL

Once you open the application you can see the configuration screen To activate press ON You can choose between the short date format or long date format. The date format follow the preference settings. If you own a Palm unit with SD or MMC Card, you can choose the SD in the card setting or if you use a Sony, select Memory Stick(MS). The on screen low bat indicator activate a regular check of the battery condition and show on screen an indicator when reach the Min level.

The low batt indicator have 3 parameter: Min Level(percent): Indicate the minumum percent level when the low battery indicator must show. Normal Time(minutes): Indicate the time interval between checks when the battery level is up the minimum level. Low Batt Time(minutes):Indicate the time interval between checks when the battery level is below the min level.

Deactivating the Program

To deactivate the program select OFF in the main setting screen.
After select OFF when you exit, the program perform a Soft Reset.

Registering the program

You can use the program for 30 days without registering. Some time you will see an splash screen to remind you. After the 30 days you can't use the program without register.
Select the “Register” option from the menu
Enter the code emailed to you

Instructions

Once the program is activated you can recall it from the Menu Command Bar. You can bring the Menu Command Bar using the grafity stroke from bottom left to upper rigth
You can check the time...
...battery
...Memory
and Card free space...
(Sony Memory Stick)
or no card...
ummmm sony again
Low bat indicator

Alternative way to launch the program

If you have an OS5 unit, you can check the "UpRight corner activation", this option let you open UtiALL with a pen stroke.
In other units you can get the same alternative using a System Extension ( Hack ) UtiHack.prc In order to use a hack you need one of the following System Extension managers: HackMaster or X-Master(freeware). Install the System Extension Manager and UtiHack.prc. Open the System Extension Manager and check UtiHack.
Tap in the upper right corner and without raise the pen make the stroke to the screen.

Version History